BFKTT - WHITE 17875;742-762 ENAMEL GLOSS ALKYD

  • MSDS: BFKTT
  • Manufacturer: AMERON INDUSTRIAL COATINGS DIV
  • Product Name: WHITE 17875;742-762 ENAMEL GLOSS ALKYD
  • National Stock Number: 8010-00-664-7653
Product Identification

Product ID:WHITE 17875;742-762 ENAMEL GLOSS ALKYD
MSDS Date:01/01/1985
FSC:8010
NIIN:00-664-7653
MSDS Number: BFKTT

Responsible Party
AMERON INDUSTRIAL COATINGS DIVISION
201 N BERRY ST
BREA, CA 92621-3904
US

Emergency Phone: 714-529-4597

Info Phone: 714-529-4597

Cage: 09869

Contractor
AMERON INDUSTRIAL COATINGS DIVISION
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

OSHA PEL 100 PPM


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

OSHA PEL 100 PPM


ETHYL BENZENE (SARA III)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5.0%

OSHA PEL 100 PPM/125 STEL

ACGIH TLV: 100 PPM/125STEL 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)

CAS: 111-15-9

RTECS: KK8225000

Fraction By Weight: <5.0%

OSHA PEL S,100 PPM

ACGIH TLV: S, 5 PPM; 9192

Hazards

Effects of Overexposure:INH:ANESTHETIC, IRRIT OF RESP TRACT OR ACUTE
CNS DEPRSSN W/HDACHE,DIZ,UNCON,COMA. SKIN & EYE:IRRIT

First Aid

First Aid:IN CASE OF CONTACT, FLUSH SKIN & EYES W/PLENTY OF WATER WHILE
REMOVING CONTAMINATED CLOTHING. IF INHALED,REMOVE TO FRESH AIR. CAL
A PHYSSCIAN IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:40F TCC
Lower Limits:0.9
Extinguishing Media:SM FIRES:CO*2,DRY CHEM. LG FIRES:POLYMER FOAM
PREFERRED
Fire Fighting Procedures:USE SELF-CONTANED BREATHING APPARATUS
Unusual Fire/Explosion Hazard:CLOSED CONTAINES EXPOSED TO HEAT MAY
EXPLODE DUE TO PRESSURE BUILD-UP

Accidental Release

Spill Release Procedures:REOVE ALL SOURCES OF IGNITION (FLAME, HOT
SURFACES, & ELECTRICAL,STATIC, OR FRICTIONAL SPARKS).AVOID
BREATHING VAPORS. VETILATE AREA.REMOVE W/INERT ABSORBENT &
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LG QTY
IN BLDG DESIGNED TO STORE NFPA CLASS ONE FLAM LIQ DO NOT TAKE
INTERNALLY.ADD LABEL WARNING
Other Precautions:GROUND CONTAINERS WHEN POURING.AVOID FREE FAL OF LIQ
IN EXCESS OF FEW IN. DO NOT FLAME CUT, BRAZE OR WELD COATED
MATERIAL W/O APROVED RESPIRATOR OR APPROPRIATE VENTILATION.
DOT:FLAM LIQ

Exposure Controls

Respiratory Protection:RESTRICT VENT:CHEM-MECH FLTR.CLSD:AIR-LINE TYPE
Ventilation:GEN DILTN/LOCAL EXHST TO KEEPT TLV/LEL BELOW LIMIT, REMV
FUM
Protective Gloves:YES
Eye Protection:YES, FOR SPALSH
Other Protective Equipment:AVOID LONG EXPOSURE TO CONTAM CLOTHING
Supplemental Safety and Health
VAPOR DENSITY:HEAVIER THAN AIR. WT PER GALLON:9.66 LBS THIS PRODUCT IS
A BAKING ENAMEL.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:223-373F
Vapor Pres:18
Evaporation Rate & Reference:SLOWER THA ETHER
Percent Volatiles by Volume:57.2

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID FIRES, HEAT & HOT SURFACES

Disposal

Waste Disposal Methods:DO NOT INCINERATE CLOSED CONTANER. DISPOSE IN
ACCORDANCE W/FED.,STATE & LOCA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.